FEATURES & BENEFITS

Belimo Energy Valve is Solving Low Delta T Leveraging IoT

Energy Valve is an IoT device utilizing advanced cloud-based analytics to leverage captured system data to the full potential providing savings and the most efficient operation. The Energy Valve is a pressure independent valve, which measures and manages coil energy by using an embedded electronic flow meter, along with supply and return water temperature sensors. It is ideal for water-side control of heating and cooling coils with programmable maximum flow settings from 1.65 - 713 GPM in valve body size ½" to 6".


Some key features include:

  • Patented Power Control and Delta T Manager logic built-in, monitor coil performance and optimize the available energy of the coil by maintaining the Delta T.
  • Glycol monitoring an exclusive feature, ensures glycol content meets design needs to provide optimum efficiency and safe operation.
  • Cloud analytics provide recommended Delta T and flow setpoints which can be updated remotely.
  • Dynamic coil performance illustrates the operation of the coil in real time accurately providing transparency of power degradation and other operational issues.
  • Most expansive communication platform on the market includes Cloud, BACnet MSTP and BACnet IP, Modbus, RTU and TCP/IP, Belimo MP-Bus, and one analog feedback signal for valve flow, power, temperature or position.





CONSULTING ENGINEERS

Thermal heat transfer energy data is transparent allowing users the ability to see and document system performance during commissioning and over time. Energy waste is identified and eliminated by modifying settings within the Energy Valve logic and by sharing the data with an Energy Management Control System.

Your analytical skillset makes you an invaluable asset to your organization and though your job is to design systems and operating sequences that meet energy codes to make facilities run more efficiently, you constantly find yourself collecting information and analyzing data when it could be spent looking for new and innovative ways to save energy and improve building performance. Belimo’s Energy Valve can:


  • Leverage system data and cloud based analytics to optimize system efficiency saving.
  • Dynamically balance the load under all operating conditions
  • Provide True Flow GPM reading for fast TAB verification and BMS data logging via BACnet
  • Eliminate costly problems associated with low Delta T syndrome.
  • Precisely match designed requirements for BTU/hr and delta T at the load with patented Power Control.
  • Reduce pumping and chiller/boiler operating costs by increasing chiller plant efficiency and eliminating coil overflow with the Metered Pressure Independent Flow control and Delta T Manager limiting logic.
  • Provide accurate coil performance data, which can be used to verify system performance during commissioning and act as a baseline standard for system performance over time.
  • Ensure that projects bids remain under budget and installations occur on time.

CONTRACTORS & DISTRIBUTORS

You're tasked with running a lean and mean operation—however, finding new and effective ways to provide unique solutions to client problems are key to achieving the ultimate goal of increasing profits and growing your business. You feel like far too much of your time is spent diagnosing technical issues and troubleshooting problems for others when it should be spent getting the job done and moving on to the next one. Belimo’s Energy Valve can:


  • Solve your client’s low Delta T syndrome problems, reduce pump cost, and release plant capacity.
  • Help you satisfy M&V requirements by using the Energy Valve package, which includes a control valve, energy meter, BACnet communication, and automatically generated commissioning proving proper installation and operation.
  • Provide freeze protection with glycol monitoring for optimum efficiency, safe operation and reduce cost.
  • Provide advanced solutions for clients incorporating cloud based analytics to benchmark and optimize system to the most efficient operation.
  • Reduce the complexity of solving problems and simplify troubleshooting with onboard diagnostic tools.
  • Reduce installation time with set up wizard that easily guides installation and saves reload set up parameters on future valves.
  • Provide extensive feedback parameters such as flow, power, valve position, Delta T – giving you the ability to implement advanced control strategies.

BUILDING OWNER

Energy prices are going up and overflow from low Delta T is costing your facility tens of thousands of dollars every year and wasting capacity. Today’s high efficiency chillers and boiler plants should implement pressure independent valves at each hydronic circuit to delivery comfort while optimizing pump and plant operation. Building expansion and tenant improvements are a constant challenge to your facility department and to the value of your property. You are having difficulty keeping clients comfortable, identifying ways to optimize your HVAC system, and preserving capital budgets. Belimo’s Energy Valve helps:


  • Utilize advanced analytic technology while leveraging captured system data to improve coil and system performance achieving increased energy savings.
  • Eliminate costly problems associated with low Delta T syndrome with recommended Delta T and flow setpoints which can be updated remotely or automatically to save time and improve efficiency.
  • View performance reports of operational efficiency in a clear graphically illustration showing current and historical performance data of flow rates, energy usage.
  • Reduce pumping and chiller/boiler operating costs by increasing chiller plant efficiency and eliminating waste zone operations
  • Showcase your building by utilizing state of the art technology.
  • Monitor glycol content to enable you to maintain the correct glycol concentration; increasing overall heat transfer and pumping efficiency and reducing operating cost.
  • Measure energy consumption with an integrated Energy Meter that provides accurate coil performance data. The data is used to verify system performance during commissioning and act as a baseline standard for system performance over time. This feature helps achieve LEED points through Energy and Atmosphere within credits 1 and 5.
  • Ensure circuits are properly balanced so tenant improvements and building expansion projects proceed smoothly without impact to other spaces.

FACILITIES MANAGER

Higher energy prices combined with costly building inefficiencies are making your job more and more difficult to perform. While you should be looking for new and innovative ways to reduce energy consumption and improve facility performance, you’re simply too busy dealing with employees, troubleshooting technical issues, and trying to combat costly problems with more money. Belimo’s Energy Valve can:


  • Eliminate costly problems associated with low Delta T syndrome by reducing coil overflow.
  • Monitor glycol content to enable you to maintain the correct glycol concentration; increasing overall heat transfer and pumping efficiency and reducing operating cost.
  • Graphically illustrated performance showing current and historical data of flow rates, energy usage, Delta T, and other points of interest.
  • Leverages system data continuously monitoring coil performance utilizing performance metrics that will alert you on reduction in coil efficiency.
  • Reduce pumping and chiller/boiler operating costs by increasing chiller plant efficiency and eliminating waste zone operations.
  • Guarantee reliable operation and occupant comfort backed by 7-year warranty with cloud activation.
  • Real time technical support via cloud technology.
  • Measure energy consumption with an integrated Energy Meter that provides accurate coil performance data. The data is used to verify system performance during commissioning and act as a baseline standard for system performance over time. This feature helps achieve LEED points through Energy and Atmosphere within credits 1 and 5.
  • Reduce unwanted chiller or boiler staging by improving plant Delta T.
  • Ensure that coils are dynamically balanced with True Flow GMP control.

ESCO

You're tasked with communicating to organizations how they can save energy and improve building performance —but key opportunities are passing you by. Why? Most of your time is spent searching for new product innovations that are backed by proven and reliable energy savings data. Belimo’s Energy Valve can:


  • Provide advanced solutions for clients incorporating cloud based analytics to benchmark and optimize system performance.
  • Deliver cloud analytics to provide recommended Delta T and flow setpoints which can be updated remotely or automatically to save time and improve efficiency.
  • Graphically illustrate performance reports showing current and historical data of flow rates, energy usage, Delta T, and other points of interest.
  • Eliminates costly problems associated with low Delta T syndrome.
  • Measures energy consumption with an integrated energy meter that provides accurate coil performance data. The data is used to verify system performance during commissioning and act as a baseline standard for system performance over time. This feature helps achieve LEED points through Energy and Atmosphere within credits 1 and 5.
  • Create utility savings; University of Miami Rosenstiel building saved $57,890 annually.

COMMISSIONING AGENT / BALANCING CONTRACTOR

The responsibilities of your job are complex. Between managing and reviewing projects, along with balancing and commissioning systems, you’ve got a lot on you plate. What you’re really looking for is an innovative product with proven energy savings data that meets your facility’s specifications without the hassle of a complex installation and/or costly maintenance requirements. Belimo’s Energy Valve can:


  • Provide an interface that allows for project specific information to be entered directly on the web page; such as, AHU # location, flow rates …etc. allowing the user to keep track of multiple valves and their operation for fast and accurate integration.
  • Guides the user through the set up and configuration process in a few simple steps, providing an immediate familiarity the valve operation.
  • Provide commission report of the valve settings for historical records and operation allowing for a confirmation of valve operation and set up.
  • Easily save settings from one valve configuration and load in another allowing for fast and accurate integration.
  • Help you satisfy M&V requirements by using the Energy Valve package, which includes a control valve, energy meter, BACnet communication to automatically generated commissioning proving proper installation and operation.
  • Ensure circuits are properly balanced so tenant improvements and building expansion projects proceed smoothly without impact to other spaces.
  • Eliminates costly problems associated with low Delta T syndrome.
  • Measures energy consumption with an integrated energy meter that provides accurate coil performance data. The data is used to verify system performance during commissioning and act as a baseline standard for system performance over time. This feature helps achieve LEED points through Energy and Atmosphere within credits 1 and 5.